Ewins Indoor Toy Box Unfinished Pine Storage Bench or Chest

This sturdy toy box bench serves two purposes; storage and seating. Since it is unfinished you can stain it or paint it to match the theme of your childs room. Great for entryways, porches, kid's rooms for toys, or use as a window seat. Includes a safety lid support and features attractive styling. This Storage Box is made of Grade A Solid Pine and top of the line hardware. This piece of furniture is truley top of the line. Compare our measurements to any other storage box on the web. You will not find a better value anywhere. Once you receive your toy box you will understand what a great deal this really is. If you have any questions on this product please call us direct.

Features:

* H-23 1/2 W- 42 1/8" D- 16 1/8"
* Inside Storage Area: 40 x 14 x 11"
* Child Safety Hinge
* 100% Unfinished Pine
* Some Assembly
* Paint or Stain it

The following is a step-by-step assembly instruction for the Ewins Indoor Toy Box Unfinished Pine Storage Bench or Chest. This sturdy toy box bench serves two purposes; storage and seating. Since it is unfinished you can stain it or paint it to match the theme of your childs room. Great for entryways, porches, kid's rooms for toys, or use as a window seat. Includes a safety lid support and features attractive styling.

What's Included
	Bench Pieces 1 - Bench Front 1 - Bench Back
	Bench Pieces 1 - Bench Right Side 1 - Bench Left Side
	Bench Pieces 1 - Bench Seat/Lid 1 - Bench Shelf
	Hardware 8 - Bolts M6x70 8 - Cross Dowels 32 - Screws M4x30 8 - Screws M2x20 6 - Screws M2x15 15 - Support Blocks (Parry Wood) 2 - Support Arms 1 - Allen Key
Bench Assembly
	Locate one of the bench sides and gather 3 of the wood support blocks and six of the M4x30 screws. Using a Philips screw driver start the screws into the support blocks exposing just the point of the screw. This will help position the support blocks over the pre-drilled pilot holes. Position the bench side with the pilot holes facing up and attach the the three support blocks. Repeat this procedure for the remaining bench side and set aside for future use.
	Locate the bench back and position with the pilot holes facing up. Gather six wood support blocks and and 12 M4x30screws. Following the procedure above attach the blocks. Gather four of the wooden dowels and insert into the middle two holes on the edges of the right and left side of the bench back. Set aside for future use.
	Locate the bench front and position with the pilot holes facing up. Gather three wood support blocks and 6 M4x 30 screws. Using the same method attach the blocks to bench front. Gather two wooden dowels and insert on each into the center hole on the right and left side edges of the bench front.
	Leave the bench front laying flat with the support blocks facing up locate one of the bench sides and gather two of the M6x70 bolts and tow of the M6 cross dowels. Insert the cross dowels into the cross dowel holes, located in the bench front, with the slotted side of the cross dowel facing up. Using a a standard screw driver position the slot in the cross dowel so it points in the direction of the bench side. Take the bench side and with shorter side facing down and press on to the bench front using the wooden dowel as a guide. Inert the the two bolts in the holes provided and tighten the bolts using the Allen key.
	Turn the now connected bench side and bench front over so they are resting on their feet. Gather two more M6x70 bolts and two more M6 cross dowels. Locate the bench back and insert the two dowels attached to the bench back in the dowels holes in bench side and press together. Insert the cross dowels and bolts and tighten. Locate the remaining bench side and attach using four bolts and four cross dowels.
	Turn the bench over on its back. Locate the bench seat/lid and position the pre-attached hinges over the hinge pilot holes in the inside of the back and attach using three M2x15 screws pre hinge. To help with positioning the bench lid/seat during installation place the unused bench shelf underneath the lid/seat this will help elevate the lid/seat to a desirable height. Once attached stand the bench back on its feet.
	With the bench resting on it's feet raise the lid/seat and insert the bench shelf it will rest on the bottom six wood support blocks forming the bottom of the bench. If the fit is tight using the allen key wrench loosen all the bolts on either the right or left bench side a few turns and it will slip right in. Re-tighten after the bench shelf is in position. Once in position gather the remaining two M4 x30 screws and secure the bench shelf in position using the pilot holes located in the right and left bench sides as a guide.
	Congratulations you new Ewins Indoor Toy Box Unfinished Pine Storage Bench or Chest is now assembled.